1 Port Parallel DB25 PCI 2.1 32 Bit Controller IO Crest Single PCI parallel port card     $14 Qty 1 - 4;     $13 5 or more

click here for specs


1 Port DB25 Parallel Printer (LPT1) PCI-Express 2.0 x1 Card IO Crest 1 Port DB25 Parallel Printer (LPT1) PCI-Express 2.0 x1 Card     $19 Qty 1 - 4;     $18 5 or more

click here for specs


5-Port USB 2.0/3-Port FireWire PCI Combo Card-US5FW3     $18.00

General Features: •VIA VT6214L / VT6306 chipsets •PCI 2.2 interface •Plug and Play •Hot Swappable

•VIA VT6306 IEEE 1394a FireWire Features: •Two (2) IEEE 1394A FireWire external ports •One (1) IEEE 1394A FireWire internal port •Integrated 400MBit PHY •Support High Performance Bus Mastering

•VIA VT6214L USB 2.0 Features: •Four (4) USB 2.0 external ports •One (1) USB 2.0 internal port •Up to 480 Mbps data transfer for USB 2.0 •USB 1.1 compliant

Package Includes: •3-Port Firewire + 5-Port USB 2.0 Combo PCI Card •Driver CD •FireWire cable

Low profile parallel port bracket

Mini L-Bracket for DB-25. They are not guaranteed to work on all PCI and PCI cards as the hole for the port is a bit high. They will work on Parallel port to motherboard header cables


Mini L-Bracket for DB-25

Parallel port to motherboard header cable     $3.99 Qty 1 - 4;     $3.75 5 or more

Parallel/Serial port cable DB-25 female to 26 pin IDC socket

This does not work on MSI motherboards that require the mini IDC 26-pin female connector. Our part# for that is Prin/clb-MSI which should already be listed on this page.

  Sienoc PCI-E Serial COM DB9 RS-232 + DB25 Printer Lpt1 Port    


  • With WCH chipset Compliant whit PCI-Express Revision 1.0a
  • Support Standard Parallel Port (SPP), Enhanced Parallel Port (EPP) & Enhanced CapabilityPort (ECP),
  • Data transfer rate support up to 115200bps (Serial Port), Data transfer rate support up to 1.5MB/Sec. (Parallel Port
  • Support RS-232 Hardware Flow Control SPP, PS2, EPP, ECP Compatible IEEE 1284 Printer Port
  • Message: This card can not use for the 278 or 378 Port When you connect the external devices( such as plotter,machine tool ) to this card ,the PC's system automatically assigns the address port (such as LPT1,COM1). If this address port of the peripheral equipment isn't on 278 or 378 port ,or can modify to other port. The peripheral equipment can normal use .


Siig Dual Profile PCI Express 1-Port ECP/EPP Parallel Adapter

$28.00Qty 1;     $26.00 Qty 2+

Click here for Specs

9-pin Serial to 10-pin Header Slot Plate F903-N      $3.50 Qty 1 - 9;     $3.25 Qty 10 - 24;     $3.00 25 or more  Low Profile Add $9

Connectors DB9 Male, IDC 10. Works on most motherboards that have extra serial port headers. Low Profile Available too!

This version is also known as the "AT-EVEREX" version. It will not work if you need the "DTK" style. Most current motherboards will use this "AT-EVEREX" style , but if you have doubts contact your motherboard MFR.

  SIIG 2-Port Serial PCI Board 9-pin


Click here for Specs

SYBA 2-port DB-9 Serial (RS-232, COM) PCI-e Controller Card with two Low Profile Brackets, MSC9922 Chipset

$28.00 Qty 1 - 2;     $26.00 Qty 3+

Click here for Specs

Trendnet TFU-H33PI 6-Port USB 2.0/FireWire Combo PCI Adapter

Click here for Specs     $25.00 Qty 1 - 2 ;     $24.00 3 or more

SIIG Dual Profile PCIe adapter with 2 USB 3.0 ports

Click here for Specs     $26 Qty 1 - 2;     $24.00 3 or more

Low Profile bracket for VGA or DB9     $2.89 Qty 1 - 4;     $2.75 5 or more   or VGA 

Mini L-Bracket for VGA or DB-9. Cut is in the middle of the unit for the Serial port and some VGA only output cards. We do keep a small quantity of units with the VGA opening on the upper end of the bracket. See selections

Select Hole for the port ; In The Middle or on the upper portion